Updating to Official Firmware 5.03 Back to Top
Your file maybe be need 503.PBP or EBOOT_503.PBP, in that case, just rename it to EBOOT.PBP
Installing ChickHEN R2 Back to Top
to exit out of USB MODEOne of two things will happen when this is done.
1. Your PSP will freeze for 10 seconds and totally shut off by itself, in which case try step 13 again.
2. Your PSP will flash a green screen or some weird lines on your screen and boot into ChickHEN seconds later
You want number 2 to happen... duh
Go to your System Settings
Of course your Mac Address won't say [Hidden] yours will actually have a real Mac Address showing. I will show you how to hide it later.
Installing ChickHEN R2 Mod2 Back to Top
If you installed ChickHEN R2 before this or currently have it installed, you will need to delete the old ChickHEN files first !
Delete the ChickHEN folder froom ms0:/PSP/PHOTO/ and delete the h.bin file from ms0:/
1. Download the ChickHEN mod2 file from the links above.
2. Extract the ChickHEN mod2 files to your Desktop.
3. Connect your PSP to your Computer using a USB Cable.
4. Open up the PSP drive in "My Computer"
5. Step 4 will have opened up your memory card so you can see its' contents, this is referred to as ms0 so remember this well !
6. From the ChickHEN mod2 folder you got in step 3, move the h.bin file over to your the root of your memory stick.
Overwrite when prompted.
7. You will see a folder named "PSP" go ahead and open that up.
8. Now you will need to create a folder named "PHOTO" make sure it's in all capitals.
9. From the ChickHEN mod2 folder you got in step 3, you will see a PICTURE, go ahead and open that up.
10. From step 9, you should now see a folder called "ChickHEN mod2" and this folder should have 4 gif files it and a tiff file. You'll want to move the entire folder along with all the files in it to the newly created PHOTO folder you created in step 8.
11. Go ahead and now press to exit out of USB MODE
12. Scroll over to your Photo menu and open the memory stick icon.
13. Delete any other folders that appear in this menu, delete any other images that appear in this menu and then turn your psp off and then back on again, then do step 12 and then skip to step 14 to ensure better loading
14. You should now see the ChickHEN mod2 folder in the photo sub menu, go ahead and open it up and wait for ChickHEN to start
One of two things will happen when this is done.
1. Your PSP will freeze for 10 seconds and totally shut off by itself, in which case try step 13 again.
2. Your PSP will flash a green screen or some weird lines on your screen and boot into ChickHEN mod2 seconds later
You want number 2 to happen... duh
14. After ChickHEN starts up, NEVER view that folder again while in ChickHEN or any Custom Firmware.
Go to your System Settings
15. Scroll down to System Information
16. Open up System Information to see your systems information. Your System Software should now look like this
Of course your Mac Address won't say [Hidden] yours will actually have a real Mac Address showing. I will show you how to hide it later.
Delete the ChickHEN folder froom ms0:/PSP/PHOTO/ and delete the h.bin file from ms0:/
Overwrite when prompted.
to exit out of USB MODEOne of two things will happen when this is done.
1. Your PSP will freeze for 10 seconds and totally shut off by itself, in which case try step 13 again.
2. Your PSP will flash a green screen or some weird lines on your screen and boot into ChickHEN mod2 seconds later
You want number 2 to happen... duh
Go to your System Settings
Of course your Mac Address won't say [Hidden] yours will actually have a real Mac Address showing. I will show you how to hide it later.
Installing CWFEnabler 3.20 Back to Top
Installing CFWEnabler of any version will NOT require you to uninstall a previous version unless stated otherwise.
However, uninstalling the old version or other versions of CFW Enablers such as 5.0x GEN-A is always a good idea to keep your flash0 directory clean of clutter as space in this area is very limited. Think of it as like defraging your windows harddrive from time to time. Steps on how to uninstall Custom Firmware / Enablers will be provided here somewhere down the line.
Before Starting, please make sure you reboot your PSP into ChickHEN R2 only and not into GEN-A or CFWE of any version.
1. Download the CFWEnabler 3.20 file from the link above.
2. Extract the CFWEnabler 3.20 zip file to your desktop.
3. Connect your PSP to your Computer using a USB Cable.
4. Open up the PSP drive in "My Computer"
5. Step 4 will have opened up your memory card so you can see its' contents, this is referred to as ms0 so remember this well !
6. From the files you got in step two, move the PSP folder over to the root of your memoroy stick (ms0)
Overwrite existing files/folders when prompted.
7. Go ahead and now press to exit out of USB MODE
8. Scroll over to your Game menu and open up the memory stick sub icon.
9. Once you've opened up the menu, you will then see the CFWEnabler 3.20 icon that was added to the menu.
10. Once started up, you will be taken to the Installation program. At which point you should be presented with an "Uninstall" option. Go ahead and run it.
11. Plug your power cable into your PSP so you're not using battery power.
12. Once the Uninstall is finished, Go ahead and select the "Flash and Start" option. This will flash the m33 modules to your flash0.
DO NOT INTERUPT THIS PROCESS ONCE IT HAS STARTED BY ANY MEANS !
12. Once finished, you will be promted to reboot into the newly installed CFWEnabler 3.20 Select "YES" to do so.
13. Scroll over to your System Settings menu and go into the System Information submenu.
14. Open up the System Information submenu to view your System Information. Yours should look something like the screenshot below and say "5.03 M33-6" for your System Software.
If however your System Information still says you have Software "Version 5.03" or "5.03 ChickHEN R2" then you've done something wrong and need to go back to step 8 and follow it from there.
However, uninstalling the old version or other versions of CFW Enablers such as 5.0x GEN-A is always a good idea to keep your flash0 directory clean of clutter as space in this area is very limited. Think of it as like defraging your windows harddrive from time to time. Steps on how to uninstall Custom Firmware / Enablers will be provided here somewhere down the line.
Before Starting, please make sure you reboot your PSP into ChickHEN R2 only and not into GEN-A or CFWE of any version.
Overwrite existing files/folders when prompted.
to exit out of USB MODEDO NOT INTERUPT THIS PROCESS ONCE IT HAS STARTED BY ANY MEANS !
Installing CWFEnabler 3.30 Back to Top
Installing CFWEnabler of any version will NOT require you to uninstall a previous version unless stated otherwise.
However, uninstalling the old version or other versions of CFW Enablers such as 5.0x GEN-A is always a good idea to keep your flash0 directory clean of clutter as space in this area is very limited. Think of it as like defraging your windows harddrive from time to time. Steps on how to uninstall Custom Firmware / Enablers will be provided here somewhere down the line.
Before Starting, please make sure you reboot your PSP into ChickHEN R2 only and not into GEN-A or CFWE of any version.
1. Download the CFWEnabler 3.30 file from the link above.
2. Extract the CFWEnabler 3.30 zip file to your desktop.
3. Connect your PSP to your Computer using a USB Cable.
4. Open up the PSP drive in "My Computer"
5. Step 4 will have opened up your memory card so you can see its' contents, this is referred to as ms0 so remember this well !
6. From the files you got in step two, move the PSP folder over to the root of your memoroy stick (ms0)
Overwrite existing files/folders when prompted.
7. Go ahead and now press to exit out of USB MODE
8. Scroll over to your Game menu and open up the memory stick sub icon.
9. Once you've opened up the menu, you will then see the CFWEnabler 3.30 icon that was added to the menu.
10. Once started up, you will be taken to the Installation program. At which point you should be presented with an "Uninstall" option. Go ahead and run it.
11. Plug your power cable into your PSP so you're not using battery power.
12. Once the Uninstall is finished, Go ahead and select the "Flash and Start" option. This will flash the m33 modules to your flash0.
DO NOT INTERUPT THIS PROCESS ONCE IT HAS STARTED BY ANY MEANS !
12. Once finished, you will be promted to reboot into the newly installed CFWEnabler 3.30 Select "YES" to do so.
13. Scroll over to your System Settings menu and go into the System Information submenu.
14. Open up the System Information submenu to view your System Information. Yours should look something like the screenshot below and say "5.03 M33-6" for your System Software.
If however your System Information still says you have Software "Version 5.03" or "5.03 ChickHEN R2" then you've done something wrong and need to go back to step 8 and follow it from there.
However, uninstalling the old version or other versions of CFW Enablers such as 5.0x GEN-A is always a good idea to keep your flash0 directory clean of clutter as space in this area is very limited. Think of it as like defraging your windows harddrive from time to time. Steps on how to uninstall Custom Firmware / Enablers will be provided here somewhere down the line.
Before Starting, please make sure you reboot your PSP into ChickHEN R2 only and not into GEN-A or CFWE of any version.
Overwrite existing files/folders when prompted.
to exit out of USB MODEDO NOT INTERUPT THIS PROCESS ONCE IT HAS STARTED BY ANY MEANS !